Odor Control and Blower / Fan Sections

The exhaust fan section includes a centrifugal blower assembly constructed of a heavy gauge steel with a backward inclined airfoil wheel with non-overloading characteristics. The blower is AMCA Rated both for sound and air volume, with a hot rolled, polished steel shaft. Bearings are grease lubricated and self aligning pillow block type with lubricating nipples. Drives are V-belt with a capacity 25% greater than motor horsepower. The blower and motor mounting base are equipped with vibration isolators.

The discharge from the blower section can be:

• Straight Through
  
  
• Left Side Discharge
  
  
• Right Side Discharge
  
  
• Vertical Discharge
  

The blower compartment is constructed with a fully removable hinged access door on the drive side of the blower to allow for service and adjustment of belts.

The blower section is complete with a UL/ULC Listed Combination Magnetic Motor Starter Panel with a NEMA 1 cabinet for indoor usage or NEMA 3R water-proof cabinet for outdoor usage, and includes a fan motor starter, electrical overloads, disconnect switch, and terminal blocks for remote annunciation and control.

For indoor and other noise-sensitive applications, an acoustical insulation liner is provided behind an expanded metal retaining wall.